A great exterior painting project is about more than the final color. These two homes in Hampton Park, Jacksonville, FL 32256, show what a complete exterior repaint looks like from start to finish — real preparation, real coverage across every elevation, and a finished result that holds up to a closer look, not just a street-view glance.
Both homes were completed by A New Leaf Painting Contractors as part of our professional exterior painting services in Jacksonville, FL. The conditions and scope differed between them, and each project is described here based on the work performed and what the photos show.
Below are six real before-and-after comparisons from two Hampton Park homes.
Hampton Park Project Snapshot
- Neighborhood: Hampton Park
- Location: Jacksonville, FL 32256
- Projects Featured: 2 Exterior Home Repaints
- Service: Exterior House Painting
- Contractor: A New Leaf Painting Contractors
- Serving Northeast Florida Since: 2001
- Exterior Surfaces: Stucco, soffits, fascia, trim, doors, garage doors, and other included exterior surfaces
- Paint System: Sherwin-Williams® Loxon® XP and Latitude® for the stucco body and trim; Sherwin-Williams® Pro Industrial® for soffits and fascia
- Preparation: Pressure washing, stucco preparation, caulking, sealing, surface repairs as needed, and preparation of all included surfaces before painting
Hampton Park Exterior Painting Project #1
This Hampton Park home’s stucco exterior started with a warm neutral finish. Before repainting, the exterior showed noticeable weathering and fading, along with caulking needs at exterior joints and transitions that required attention during preparation. The completed project gave the home a new color palette and crisp white trim, creating a dramatic transformation across the front, side, and rear elevations — including the garage door.
Before & After #1 — Plain tan stucco transformed to a teal green exterior with white trim.
Before & After #2 — The garage door was repainted to match the home’s new teal green body color for a cohesive front elevation.
Before & After #3 — Even the rear wall near the utility meter and electrical panel received the full repaint.
Preparation Before Painting
Before repainting, our team pressure washed the exterior and completed the stucco preparation needed to create a sound surface for the new coating system. This included extensive exterior caulking and sealing at joints, transitions, cracks, and other areas requiring attention before painting.
This preparation is especially important on weathered Florida stucco. Rather than simply applying new paint over the existing exterior, the goal was to address the visible surface conditions first and prepare the home for a complete repaint.
Exterior Coating System
For the stucco body and trim, our team used a Sherwin-Williams® exterior coating system incorporating Loxon® XP and Latitude®. The soffits and fascia were finished with Sherwin-Williams® Pro Industrial® coatings appropriate for those surfaces.
The combination allowed the coating system to be matched to the different exterior substrates rather than treating every surface of the home exactly the same.
Hampton Park Exterior Painting Project #2
Our second Hampton Park project was another complete exterior repaint, but with its own existing conditions and architectural details. The exterior showed considerable weathering, along with caulking and preparation needs that had to be addressed before the new coating system was applied. The before-and-after comparisons show the transformation across the front, side, and rear elevations — not just the street-facing portion of the home.
Before & After #1 — Refreshed stucco, with the fascia and soffits finished in Sherwin-Williams® Pro Industrial®.
Before & After #2 — The side wall’s freshly painted stucco, shown before and after.
Before & After #3 — The rear, patio-facing wall completed as part of the full exterior scope.
Preparation Before Painting
The second Hampton Park home also required thorough preparation before the finish coatings were applied. Our crew pressure washed the exterior, prepared the stucco surfaces, and completed the necessary caulking and sealing throughout the painting scope.
Special attention was given to joints, transitions, cracks, and other areas where the existing exterior needed attention before repainting. Once preparation was complete, the different exterior surfaces were coated with products selected for their specific application.
Exterior Coating System
This Hampton Park exterior was painted using Sherwin-Williams® Loxon® XP and Latitude® on the stucco body and trim, with Sherwin-Williams® Pro Industrial® used on the soffits and fascia.
Using different coatings where appropriate allowed our team to build the exterior painting system around the home’s actual surfaces rather than relying on a single product for every part of the exterior.
What These Two Hampton Park Exterior Projects Had in Common
Different homes, different starting points, different finished colors — but both projects followed the same underlying approach. The existing exterior condition determined the scope, not a one-size-fits-all checklist. Every elevation was completed, not just the ones visible from the street. And what shows up in the after photos is only possible because of preparation that doesn’t show up in any photo at all.
The finished paint is what everyone sees. The before photos show why the preparation underneath it matters.
If your own home is showing signs of chalking, fading, or coating deterioration rather than simply needing a color update, our real East Hampton project walks through what exterior paint chalking looks like and why it matters before repainting. And if you’ve noticed one side of your home fading faster than the rest, see our guide on why one side of a Jacksonville house fades faster than the others.
Exterior Painting in Hampton Park, Jacksonville
A New Leaf Painting Contractors has served Jacksonville and Northeast Florida since 2001. The two homes featured on this page are separate exterior painting projects completed by our team in Hampton Park, giving homeowners the opportunity to see our work on real homes within the community — not stock photography or generic examples.
Our exterior projects can include pressure washing, surface preparation, caulking, stucco repairs, wood repairs, priming, and professional application of premium Sherwin-Williams® and Benjamin Moore® coating systems based on the condition and scope of the individual home. Every project starts with a clear, written scope so homeowners know exactly what’s included before work begins. A New Leaf Painting Contractors is fully Licensed and Insured.
Planning to Repaint Your Hampton Park Home?
If you’re considering repainting a home in Hampton Park or the surrounding 32256 area, learn more about how our exterior painters in Jacksonville, FL prepare and repaint stucco, siding, trim, fascia, soffits, doors, garage doors, and other exterior surfaces. Explore the full Exterior Painting Resource Center for more real Jacksonville projects and guides.
Schedule Your Exterior Painting Estimate →
Call 904-615-6599
